首  頁
HOME
關於我們
ABOUT US
產品展示
PRODUCTS
客戶反饋
FEEDBACK
聯系我們
CONTACT
 
產品展示  Products
水性光油
水性泡沫(EPO)漆
水性玻璃、五金烤漆
水性玻璃(五金)丝印油墨
水性绝缘漆
其它

点击这里给我发消息  点击这里给我发消息
 
 
產品展示  Products

水性泡沫(EPO)漆
 

 

    BJ-6800T系列水性泡沫(EPO)漆(Water-borne EPO Varnish)

    BJ-6800T系列水性泡沫漆不含有害的有机溶剂,无毒,无味,绿色环保,耐水、耐候、耐老化,防水防火阻燃,附着力强,不腐蚀泡沫,漆膜平整柔和,装饰效果好,储运安全,使用方便等特点。
    本产品适用于各种泡沫的保护和装饰。水性环保泡沫漆被广泛应用于模型飞机、模型轮船、广告宣传品、塑料模具、儿童玩具、工艺品等产品上。
 
This water-borne EPO varnish does not contain any unhealthful solvent. It has a great adhesive force and great re-coating property. Being Non-burning, non-burst, non-poisonous, it is pollution-free. It is hard and flexible, with high performance of aging resistance, abrasion resistance, and salt spray resistance. With no harm to foam materials, it has excellent decoration effect. Safe storage and transportation and convenient to use are also the advantages.
 
Application: mainly used in protection and ornament of the foam products like plane models, ship models, advertisement products, plastic models, and children’s playing toys and other art wares.

 产品指标参数(Properties and Parameters)

    使用方法:
     使用前将漆充分搅拌均匀,若粘度过大,可适量加入5%~20%的无杂质的纯净水进行稀释,搅拌均匀,过滤静置消泡后方可施工。采用刷涂、喷涂、辊涂均可,具体施工方式根据客户工艺条件选择,每遍重涂间隔在1小时以上,以实干为准,如有施工问题,请与我公司技术工程部联系。
 
How to use
Stir it before using. Add water 5%-20% for dilution if the viscosity is high. Do not use it until the bubbles are gone. The water to be used for dilution must be clean without any impurities. The products cannot be used with oily paint or products from any other companies. Keep the tools and the environment clean, and make sure the coating surface is smooth, dry and clean. Contact our engineering department if you have any problems.

 

 

 

 

 

 


 
版權所有 2011 深圳市邦傑添民塗料有限公司 公司地址:深圳市龍崗區坪地街道六聯社區發方村富臨路41-1號 粤ICP备11100764号
电话:0755-84823735 传真:0755-84827652