BJ-6800A系列水性五金烤漆（Water-borne baking varnish for metals）
BJ-6800A系列是应用广泛的高性能水性烤漆，具有卓越的附着力和重涂性，用水做稀释剂，不易燃，不易爆，无毒对环境无污染；同时还具有高硬度和柔韧性、耐老化、高耐磨、耐盐雾等优秀的综合特性。
用途：主要应用于电脑机箱、笔记本外壳、手机外壳、高尔夫球头、自行车等铜、铝、铁、不锈钢、锌合金等等金属材质上的产品涂装。
This water-borne varnish is widely used for its high-performance. With water for the diluents, it has great adhesive force and great re-coating property. Being Non-burning, non-burst, non-poisonous, it is pollution-free. It is hard and flexible, with high performance of aging resistance, abrasion resistance, and salt spray resistance.
Application: mainly used in varnishing metal parts from computer chassis, laptop outer case, mobile phone outer covers, golf head, bicycles. These metal parts include copper, aluminum, iron, stainless steel, zinc alloy etc.
性能和指标（Properties and Parameters)
使用方法：
本系列产品直接用水做稀释剂，加水量根据用户对漆膜厚度的要求来确定，如出现流挂，需减少加水量，出现桔皮适量增加水量。加水稀释后，搅拌均匀，过滤静置消泡后方可施工。涂装后的工件须进入低温到高温段烘烤，烘烤时间根据漆膜厚度和工件的传热度来调节。 稀释所用的自来水必须纯净无杂质，且不可与油性及其他公司的产品掺合使用，施工环境和配漆器具必须干净，待涂物体表面必须平整、干燥、清洁。
How to use
This product is diluted with water. Users can adjust the water according to different coating thicknesses. If sagging occurs, decrease the water amount; if orange-peel happens, increase the water amount. After diluting by water, stir it to make it even. Do not use it until the bubbles are gone. Coated tools must be dried from low temperature to high temperature; the drying time can be adjusted according to coating thickness and tools’ heat conductivity.
The water to be used for dilution must be clean without any impurities. The products cannot be used together with oily varnish or products from any other companies. Keep the tools and the environment clean, and make sure the coating surface is smooth, dry and clean.
|
