首  頁
HOME
關於我們
ABOUT US
產品展示
PRODUCTS
客戶反饋
FEEDBACK
聯系我們
CONTACT
 
產品展示  Products
水性光油
水性泡沫(EPO)漆
水性玻璃、五金烤漆
水性玻璃(五金)丝印油墨
水性绝缘漆
其它

点击这里给我发消息  点击这里给我发消息
 
 
產品展示  Products

水性光油
 

 

    BJ-6800系列水性光油(Series Water-borne Gloss Varnish)

     BJ-6800系列水性光油主体以单组份、稀释剂、辅助剂三大类组成,具有无色、无味、透明感强且无毒、成本低,有良好的光泽性、耐磨性、耐弯曲性、优异的附着力、抗紫外线耐黄变、不燃不爆、对环境无污染等特点。水性光油的施工面积每公斤比油性光油要多2至3平米,比油性光油更经济实惠,成本更低,是油性光油的最佳替换产品。
     适用于五金(运动器材、自行车)、玻璃灯饰、碳纤维等产品上涂装。
 
BJ-6800 Series Water-borne Gloss Varnish is mainly composed of single composite, diluents and adjuvant. Colorless, odorless, non-poisonous, and with a strong transparent feeling, it is less expensive. This kind of varnish material has great glossiness, abrasion performance and bending resistance, and has excellent adhesive force. Resisting to UV for anti-yellowing and being Non -burning and non –burst, it is pollution-free. This varnish is 2 to 3 square meters (per KG) more than oily gloss coating. Being more economical and more effective, it is the best substitute product for oily gloss coating.
It is applied in coating metal parts (sports equipment, bicycles), glass decorating lights, and carbon fiber products.
 
 漆膜性能与参数指标(Properties And Parameters)

注:测试板为打磨过的麻口铁,烘烤可根据温度的高低调整烘烤时间。
Note: Tinplate was used for the sampling. The drying time can be adjusted according to high or low temperatures.
 
施工说明:
    本产品适用于油性烤漆的所有施工工艺,但不可与其他公司的产品掺合使用,施工环境、配漆器具必须干净。光油稀释后,请搅拌均匀,用滤布过滤,静置消泡后方可施工。涂装后的工件需静置流平,再进行烘烤,烘烤的温度和时间决定漆膜的性能。
 
How to use

This product is applicable to all oily baking varnish. However, do not use it together with other company’s products. Keep the tools and the environment clean. After diluting the varnish, stir it to make it equal. Only when the bubbles are gone can it be used. Coated tools must be stewed and leveled before drying. The coating effect is subject to the drying temperature and the drying time.


 
版權所有 2011 深圳市邦傑添民塗料有限公司 公司地址:深圳市龍崗區坪地街道六聯社區發方村富臨路41-1號 粤ICP备11100764号
电话:0755-84823735 传真:0755-84827652